首 页 | 兆通产品部 | 兆通工程部 | 兆通维护部 | 兆通销售站 | 天猫店铺 | 技术中心 | 方案中心 | 典型案例 | 兆通论坛
当前页面:首页>>静态路由的应用配置实例
[2009-9-4]
 
静态路由的应用

    Switch 0 的配置:

    Switch>en
    Switch>enable
    Switch#conf
    Switch#configure
    Switch#configure terminal
    Enter configuration commands, one per line.  End with CNTL/Z.
    Switch(config)#int
    Switch(config)#interface f0/1
    Switch(config-if)#no swi
    Switch(config-if)#no switchport

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to upSwitch(config-if)#
    Switch(config-if)#ip add
    Switch(config-if)#ip address 1.1.1.1 255.0.0.0
    Switch(config-if)#no shut
    Switch(config-if)#no shutdown
    Switch(config-if)#exit
    Switch(config)#int
    Switch(config)#interface f
    Switch(config)#interface fastEthernet 0/2
    Switch(config-if)#ip add
    Switch(config-if)#no sw
    Switch(config-if)#no switchport

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to down
    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to upSwitch(config-if)#
    Switch(config-if)#ip addre
    Switch(config-if)#ip address 2.2.2.1 255.0.0.0
    Switch(config-if)#no shut
    Switch(config-if)#no shutdown
    Switch(config-if)#exit
    Switch(config)#ip route 4.0.0.0 255.0.0.0 f
    Switch(config)#ip route 4.0.0.0 255.0.0.0 f?
    FastEthernet
    Switch(config)#ip route 4.0.0.0 255.0.0.0 fa
    Switch(config)#ip route 4.0.0.0 255.0.0.0 fastEthernet 0/2
    Switch(config)#no shut
    Switch(config)#exit
    %SYS-5-CONFIG_I: Configured from console by console
    Switch#show ip route
    Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
           D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
           N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
           E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
           i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
           * - candidate default, U - per-user static route, o - ODR
           P - periodic downloaded static route

    Gateway of last resort is not set

    C    1.0.0.0/8 is directly connected, FastEthernet0/1
    C    2.0.0.0/8 is directly connected, FastEthernet0/2
    S    4.0.0.0/8 is directly connected, FastEthernet0/2
    Switch#
    Switch#show ?
      access-lists       List access lists
      adjacency          Adjacent nodes
      arp                Arp table
      cdp                CDP information
      clock              Display the system clock
      controllers        Interface controllers status
      crypto             Encryption module
      debugging          State of each debugging option
      dhcp               Dynamic Host Configuration Protocol status
      etherchannel       EtherChannel information
      flash:             display information about flash: file system
      frame-relay        Frame-Relay information
      history            Display the session command history
      hosts              IP domain-name, lookup style, nameservers, and host table
      interfaces         Interface status and configuration
      ip                 IP information
      ipv6               IPv6 information
      mac-address-table  MAC forwarding table
      ospf               For OSPF debug only
      ospfv3             For OSPFv3 debug only
      processes          Active process statistics
      protocols          Active network routing protocols
      running-config     Current operating configuration
      sessions           Information about Telnet connections
      spanning-tree      Spanning tree topology
      ssh                Status of SSH server connections
      startup-config     Contents of startup configuration
      tcp                Status of TCP connections
      terminal           Display terminal configuration parameters
      users              Display information about terminal lines
      version            System hardware and software status
      vlan               VTP VLAN status
      vtp                Configure VLAN database
    Switch#show ip ?
      access-lists  List access lists
      arp           IP ARP table
      cef           Cisco Express Forwarding
      dhcp          Show items in the DHCP database
      eigrp         IP-EIGRP show commands
      interface     IP interface status and configuration
      nat           IP NAT information
      ospf          OSPF information
      protocols     IP routing protocol process parameters and statistics
      rip           IP RIP show commands
      route         IP routing table
      ssh           Information on SSH
    Switch#show ip int
    Switch#show ip interface ?
      Ethernet         IEEE 802.3
      FastEthernet     FastEthernet IEEE 802.3
      GigabitEthernet  GigabitEthernet IEEE 802.3z
      Loopback         Loopback interface
      Serial           Serial
      Vlan             Catalyst Vlans
      brief            Brief summary of IP status and configuration
      <cr>
    Switch#show ip interface f
    Switch#show ip interface fastEthernet 0/1
    FastEthernet0/1 is up, line protocol is up
      Internet protocol processing disabled
    Switch#show ip interface fastEthernet 0/2
    FastEthernet0/2 is up, line protocol is up
      Internet protocol processing disabled
    Switch#show ru
    Switch#show running-config
    Building configuration...


[返回列表]

首页 | 网络工程 | 综合布线 | 安防监控 摄像头 摄像机 | 方案中心 | 技术中心 | TOP | 典型案例
电话:025-83693855
Copyright © 2005-2006 All Rights Reserved
南京总部: 南京市珠江路成贤大厦7楼